Sleeve Anchor Bolt Tare da Hex Flange Nut
Menene anka hannun riga?
Anga hannun riga, wanda kuma ake kira Dyna-Bolt, Sleeve-All, Power Bolt, da Thunder Sleeve wani nau'in fastener ne da ake amfani da shi don tabbatar da abubuwa zuwa simintin siminti ko masonry.Ana iya amfani da su don haɗuwa da simintin siminti biyu ko fiye, ko kuma ɗaure wani abu kamar shiryayye zuwa bangon bulo.Ana kuma kiran ankaren hannu a matsayin ƙwanƙwasa mataki biyu ko ƙwanƙwasa a wasu wurare.
Anga hannun riga ya ƙunshi dunƙule ƙarfe mai ƙarfi ko ingarma mai siffa mai siffar mazugi wanda ke fitowa zuwa gefe.Hannun karfe yana nannade waje da ingarma, yana ba da damar titin ingarma ta mika karshen hannun rigar.Mai wanki da goro suna zaune a saman kullin don daidaitawa da shigarwa.Da zarar an shigar da anga hannun riga a cikin siminti, masu sakawa suna juya goro don jawo ingarma zuwa hannun hannun riga.Yayin da ƙarshen tambarin ya wuce cikin hannun riga, yana sa hannun ya faɗaɗa waje ya kama simintin don samun amintaccen riko.
Umarnin Shigarwa
Nau'in anka
Aikace-aikace
bayanin samfurin
| Sunan samfur | Anga hannun riga tare da hex flange kwayoyi |
| Kayan abu | 1.Bakin Karfe: SS304, SS316 2. Karfe: C45 (K1045), C46 (K1046), C20 3. Karfe Karfe: 1010,1035,1045 4.Aluminum ko Aluminum Alloy: Al6061, Al6063, Al7075, da dai sauransu 5.Brass: H59, H62, Copper, Bronze |
| Ƙarshen Sama | Duk nau'ikan jiyya na saman suna samuwa kamar plating na chrome, plating zinc, plating nick, murfin foda, e-shafi, suturar tsoma, gogewar madubi, da sauransu. |
| Aikace-aikace | Kayan Wutar Lantarki/Aiki/Kayan Kaya/Kayan masana'antu Karfe na kayan aikin hatimi |
| Gudanarwa | ƙirƙira, stamping, zane mai zurfi, naushi, kadi, yankan Laser, lankwasawa, walƙiya mara ƙarfi, machining da taro |
| Akwai Takaddun shaida | ISO 9001, SGS, Takaddun Takaddun Kayan aiki |
| Rigakafin Hatsari | Gudanar da Ayyukan Tsaro |
Sleeve Anchor FAQ
1. Menene nau'ikan kai daban-daban akwai?
Akwai nau'ikan kai guda huɗu daban-daban, kodayake ba duk diamita ba ne a kowane salon kai.Salon kai sune acorn, hex, round, ko lebur countersunk head.
2. Ana samun anka hannun riga a bakin karfe?
Ee, yana samuwa tare da murfin zinc da kuma a cikin bakin karfe 304.
3. Zan iya samun galvanized anchors?
A'a, ba a kera waɗannan anchors tare da rufin galvanized.Suna samuwa ne kawai a cikin zinc plated carbon karfe da 304 bakin karfe.
4. Suna zuwa ne a hade?
Ee, sun zo an haɗa su kuma suna shirye don shigarwa.
5. Shin waɗannan anka sun zo da goro da wanki?
Ee, sun zo tare da madaidaicin adadin goro da wanki.
6. Ta yaya zan tantance daidai tsayin da nake buƙata?
Don tantance tsayin da kuke buƙata, ƙara kauri na kayan aiki da ake ɗaure zuwa ƙaramin abin sakawa don diamita na anka da ake girka.
7. Ta yaya zan tantance daidai diamita na anka ina bukata?
Ana ƙayyade diamita na anga ta hanyar diamita na ramin da aka ɗaure, ta nauyin abu, ko ƙayyadaddun injiniyoyi.
8.What tushe abu za a iya amfani da a?
An ƙera anka don amfani a cikin kankare, bulo, ko toshe.
9. Wane girman zan yi rami?
Ramin da ake so a tono girmansa daidai yake da diamita na anga da ake sakawa.Misali, anka diamita ½” yana buƙatar rami ½”.
10. Shin ina buƙatar yin amfani da rawar guduma don haƙa ramin cikin tubali?
Ee, yin amfani da rawar guduma yana da mahimmanci lokacin haƙa rami don anka.
11. Yaya zurfin zan shigar da anga cikin kayan tushe?
Kowane anka na diamita yana da ƙaramin zurfin ciki don tabbatar da mafi ƙarancin ƙima.
12. Ta yaya zan matsa hannun riga?
An ɗora hannun rigar acorn da hex goro tare da madaidaicin maƙarƙashiya;an matse hannun lebur da zagaye mai kai da ko dai Phillips ko sikirin lebur.
13. Yaya nisa daga shingen da zan sa anka?
Ana buƙatar shigar da anka aƙalla diamita 5 na anka daga gefen mara tallafi.
14. Ina amfani da anchors plated zinc a cikin katako na ACQ?
A'a, ba'a ba da shawarar anka mai tutiya don amfani da itacen da aka yiwa magani ba.
Marufi da jigilar kaya
Kasuwar mu
Abokan cinikinmu
