Carbon Karfe Hex Nut Sleeve Anga
Menene anka hannun hex goro?
Hex nut sleeve anka matsakaita ce mai nauyi mai nauyi, wanda aka riga aka haɗa shi da kwaya hex, mai wanki, ingarma na maƙalli da hannun rigar ƙarfe.An ɗora shi a cikin kayan tushe na kankare ta hanyar haɓakawa.
Aikace-aikace
An yi amfani da ƙwanƙwasa ƙwanƙwasa hannun rigar hannu a ko'ina a cikin shigar da siminti, masonry da ƙwararrun wuraren aikin bulo da gina ƙayyadaddun abubuwa.Sun haɗa da ingarma mai zaren zare tare da ƙoƙon ƙonawa na waje, hannun riga mai faɗaɗa ta cikin ingarma, da goro da mai wanki a ɗayan ƙarshen.Matse goro don ja ƙarshen ingarma zuwa hannun faɗaɗawa, murkushe waje kuma ku kulle anga a cikin ƙasa.
Ana amfani da anka na hannun riga don amintar da kayan aiki da kayan aiki zuwa saman saman katako.Ana shigar da ginshiƙan hannun riga a cikin ramukan da aka riga aka haƙa, sannan za a iya tsawaita su don dacewa da aminci, mai da abubuwa zuwa siminti, bulo ko tubalan.Girman rami don shigar da anka na hannun riga yakamata yayi daidai da diamita na anka kuma ya zama zurfin 12mm-24mm fiye da zurfin da ake tsammani na anka.Lokacin shigar da anka na hannun riga, sanya goro ta yadda za a jera shi da saman anga don hana lalacewar zaren lokacin da aka dunkule angin hannun riga a cikin ramin da aka haƙa.Da zarar an shigar da anga hannun riga a cikin rami, kar a wuce gona da iri.Wannan yana rinjayar rikon anga.
Shigarwa
Mataki na 1.Hana rami na shigarwa a cikin tushe bisa ga diamita da zurfin da aka ba da shawarar a cikin ƙayyadaddun shigarwa.
Mataki na 2.Yi amfani da goga ko matse iska don tsaftace ƙazanta da tarkace a cikin rami sosai.
Mataki na 3.Bayan tabbatar da an haɗa angarin daidai, saka anka a cikin na'urar kuma danna shi har sai mai wanki ya tuntubi na'urar.
Mataki na 4.Danne goro don karkatar da hannun riga kuma danna madaidaicin ƙasa akan madaidaicin don cimma ƙayyadaddun juzu'in haɗuwa.
Ma'aunin Samfura
| Sunan samfur | Hex Nut Sleeve Anchors |
| Tsarin | bolt+hannu+ lebur mai wanki+taper |
| Kayan abu | Q235, 45#, AISI304(A2-70), AISI316 (A4-80) da dai sauransu |
| Girman | M6-M24 ko maras misali kamar buƙatun & ƙira |
| Daraja | 4.8, 6.8, 8.8, 10.9, 12.9 |
| Surface | bayyananne, galvanized, bule fari, YZP da dai sauransu. |
| Amfani | Tsarin ƙarfe, bayanan martaba, bene, faranti masu ɗaukar nauyi, brackets, dogo, bango, injuna, katako, da sauransu. |
| Nau'in | wedge anga, hannun riga flange goro, 3pcs garkuwa anka, 4pcs garkuwa anga, drop in anchors, karfe frame anchors, kunnen doki anchors. |
| Misali | Za a iya aika samfurin kyauta don gwaji |
| Magana | OEM/ODM yana samuwa bisa ga zane da samfurori na abokin ciniki. |
Marufi da jigilar kaya
Kasuwar mu
Abokan cinikinmu
